
Home / Solar panel installation
Solar panel installationSolar panel installationfor Rodney and North Shore homes.
Registered electricians, Vector paperwork handled, and an instant online quote: enter a few details and your quote is ready in minutes, with no strings attached.
What a solar power installation involves
A home solar power installation is more than panels on a roof. It's the racking engineered for your roof and wind zone, an inverter wired into your switchboard, an inspection and certificate, and approval from Vector before it's switched on.
We handle all of it, from the design and the paperwork to the install. Your part is the online quote: tap through a few questions, with no uploads.
- ConsentMost home roof arrays under 40 m² no longer need a building consent (since October 2025).
- Electrical sign-offHigh-risk electrical work: inspected, with a certificate of compliance and record of inspection.
- Network approvalVector approves the connection. We lodge it for you.
- Your priceWorked out from your answers about your home and power use, not a guess.

Start your instant online solar quote
What's your roof made of? Tap one to go straight to the next question. No uploads needed.
Solar installation questions, answered
What people ask most before a solar panel installation.
How does solar panel installation work?
It runs in four stages:
- You tap through a few questions in our online quote, with no uploads, and your quote is ready in minutes.
- If you go ahead, an install consultation confirms the system size and your final price, with nothing to pay before then.
- Then a registered electrician installs the racking, panels and inverter, and wires it into your switchboard.
- It's inspected and certified, Vector approves the connection, and your system is switched on.
Who is allowed to install solar panels in NZ?
A grid-connected solar system is high-risk electrical work. A registered electrician installs it to the AS/NZS 3000 and AS/NZS 5033 standards, an electrical inspector inspects it, and you receive a certificate of compliance and a record of inspection. Electricians connecting solar to the grid also need the Mains Parallel Generation endorsement from the Electrical Workers Registration Board. You can't legally wire it in yourself.
Do I need a building consent for solar panels?
Usually not, since 23 October 2025. Roof-mounted solar arrays under 40 m² are exempt from building consent in wind zones up to High, as long as they meet the exemption's conditions. Bigger arrays, or homes in a Very High wind zone or above, can still be exempt under a second exemption that needs more engineering checks. Either way, the work still has to meet the Building Code and the district plan. We check your wind zone and roof before we confirm the design.
Do I need Vector's approval before solar is switched on?
Yes. Vector runs the local power lines here and has to approve any solar system before it's connected. For a home system of 10 kW or less with a compatible inverter, Vector says it will ordinarily process the application within 10 business days. Single-phase homes can be offered a dynamic export limit of up to 10 kW, which Vector can turn down at busy times on the network. If the inverter can't talk to Vector's system, a fixed 2.5 kW export limit applies. We lodge the application for you.
What roof types can solar panels go on?
Most of them. Metal roofs such as corrugated iron and tray or 5-rib are the simplest. Concrete, clay and pressed metal tiles, shingles, membrane or flat roofs and slate can usually take panels too, with different fixings, and some need extra checks. Roof pitch, direction, shading and the number of storeys all change the design. That's why the quote asks about your roof, with a Not sure option on every question, and an install consultation confirms it before you pay anything. If your roof might contain asbestos, mention it when we call to book your install consultation so we plan for it.
Will salt air damage solar panels?
Salt can corrode racking and fixings faster than it harms the glass, so the hardware matters most. Near the coast we use panels tested to the IEC 61701 salt mist standard and stainless or marine-grade fixings, and we check each brand's warranty terms for coastal sites in writing. EECA suggests coastal panels may need cleaning every 3 to 6 months, so plan on a regular hose-down.
How long does a solar installation take?
The physical install is usually the short part. Most of the wait is the design check and Vector's approval, which Vector says ordinarily takes up to 10 business days for a compatible home system. We give you dates when you accept your quote.
Will solar work if my roof doesn't face north?
Yes. North-facing roofs produce the most over a day, but east and west roofs still work well, and they produce more in the morning or late afternoon, when many homes use power. Panels can also be split across two roof faces. The quote asks which way your main sunny side faces, with a Not sure option, and your price reflects it.
How long do solar panels last, and what upkeep do they need?
Panels are built to keep producing for decades, and most carry long performance warranties. Upkeep is light: keep them clear of heavy shade and dirt, and near the coast give them a rinse every few months. The inverter is the part most likely to need replacing during the system's life, so check its warranty too.
Sources: WorkSafe: certification for PV systems · MBIE: solar panel consent exemptions (Oct 2025) · MBIE: exemption for arrays under 40 m² · Vector: connecting 10 kW or less · EECA: getting the most from solar

Instant online solar quote, no strings attached
Tap through a few questions, with no uploads, and your quote is ready in minutes. Every question has a Not sure option.
Tell us about your home
Tap through a few questions about your house, roof and power use. Not sure? There's an option for that.
You, a few minutesSee your estimate
Your quote is ready in minutes, with options with and without a battery, and we email you a copy.
InstantConfirm and book
If you go ahead, an install consultation confirms your final price, with nothing to pay before then.
You and usInstall and switch on
Once you go ahead, a registered electrician installs it. It's inspected and approved by Vector before it's switched on.
Us, paperwork includedKeep reading

Ready for a real price? Tap through a few questions.
Answer a few questions about your home in the online quote, with no uploads. Your quote is ready in minutes, with no strings attached.
Get my instant quote